REQUEST

Data sheet

• WENGLOR Retro-Reflex Sensor for Transparent Objects
• Condition monitoring
• IO-Link 1.1
• No blind spot from single-lens optics
• Special for glass, PET and films

P1NK202 Optical Data:
Range: 2,600 mm
Reference Reflector/Reflector Foil RQ100BA
Clear Glass Recognition: yes

Switching Hysteresis: < 5 %
Light Source Red Light
Polarization Filter yes
Service Life :(T = +25 °C) 100,000 h
Max. Ambient Light 10,000 Lux
Light Spot Diameter see Table 1
Single-Lens Optic yes
Electrical Data
Supply Voltage 10 … 30 V DC
Supply Voltage with IO-Link 18 … 30 V DC
Current Consumption (Ub = 24 V) < 20 mA
Switching Frequency 2,000 Hz
Switching frequency (speed mode) 3,500 Hz
Response Time 0.25 ms
Response time (speed mode) 0.14 ms
Temperature Drift < 3 %
Temperature Range -40 … 60 °C
Switching Output Voltage Drop < 2 V
Switching Output/Switching Current 100 mA
Residual Current Switching Output < 50 µA
Short Circuit Protection yes
Reverse Polarity Protection yes
Overload Protection yes
Interface IO-Link V1.1
Protection Class III
Mechanical Data
Setting Method Potentiometer
Housing Material Plastic
Degree of Protection IP67/IP68
Connection M12 × 1; 4-pin
Optic Cover PMMA
Safety-relevant Data
MTTFd (EN ISO 13849-1) 2,690.44 a
P1NK202 Output:
IO-Link yes
PNP NO/NC antivalent yes
Adjustable parameters
Output Push-pull
NPN
PNP
Circuit NC
NO
Inactive
Error output
NC+NO
Other parameters Off-delay
On-delay
Mode of operation
Hysteresis
Switching point
Emitted light

Hannomat